Tiger XT VOC Detector

Description

The Tiger VOC detector is a revolutionary handheld gas detection instrument for the rapid, accurate detection of volatile organic compounds (VOCs) within the harshest of environments.

Features

Improved Robust Design

Large Internal Gas Table

IP65 Ingress Protection

Fast Response Time & Clear Down

Introduction

Description

The Tiger XT’s photoionisation detection (PID) technology has been independently verified as best performing on the market for speed, accuracy, resistance to humidity and contamination, thanks to its patented Fence Electrode Technology. Its patented Fence Electrode Technology and anti-contamination design ensures optimal performance within humid and heavily contaminated atmospheres, extending run time in the field.

The Tiger XT is the most advanced handheld VOC detector on the market with the widest measurement range, accurately detecting gases down to 1 part per billion (ppb) up to 20,000 part per million (ppm). Tiger has the fastest response time on the market of just two seconds, and is as quick to clear down. The Tiger XT handheld VOC gas detector can detect over 750 VOCs and toxic compounds!

Features

Improved Robust Design
The instrument’s rugged body can withstand harsh environments
Large Internal Gas Table
Internal gas table has over 750 VOCs & toxic compounds
IP65 Ingress Protection
Protection against a range of conditions and weather temperatures
Fast Response Time & Clear Down
<2 second response time, one of the fastest and most accurate on the market
Instantaneous Alarms
Bright visible alarms: RED & AMBER with loud sounder (95 dBA at 300 mm (12”))
Humidity Resistant and Anti-Contamination Design
Patented Fence Electrode Technology ensures optimal performance and extends run time

Specifications

Minimum Resolution*	1 ppb or 0.001 mg/m3
Maximum Reading**	20,000 ppm or 20,000 mg/m3
Response Time	T90 < 2 seconds
Accuracy*	± 5% display reading ± one digit
Linearity*	± 5% display reading ± one digit
Intrinsically Safe Approvals	II1GExiaIICT4Ga Tamb = – 15 0C =Ta =+45 0C (with alkaline battery pack) ITS09ATEX26890X IECEx ITS 10.0036X 3193491 conforms to UL Std. 913, 61010-1 & Certified to CAN/CSA Std. C22.2 No. 61010-1
Battery Life	Li-ion: life up to 24 hours continual use Alkaline: (Duracell Procell MN 1500) life up to 8.5 hours continual use
Lamps	10.6 eV Krypton PID lamp (standard) and 11.7eV lamps available
Data Logging*	Including date / time: 120,000 points
Communication	Direct USB 1.1 connection
Calibration	Standard calibration 100 ppm isobutylene Custom calibration capability
Alarm	Flashing LED and 95 dBA at 300mm (12”) audible sounder Selectable vibrating alarm Pre-programmed TWA and STEL* Pre-programmed with over 480 gases*
Flow Rate	220 ml/min in ambient conditions (with blocked flow alarm)
Temperature	Operating: -20 to 60 0C, -4 to 140 0F (non Intrinsically Safe) Humidity: 0-99% RH (non condensing)
Protection	Designed to IP65 (heavy rain) C E 1180 EMC tested to EN61326-1:2006, EN50270:2006 & CFR 47:2008 Class A
Weight & Dimensions	Instrument without probe Width: 340 x Height: 90 x Depth: 60 mm (13.4 x 3.6 x 2.4”) Standard case 420 x 320 x 97 mm (16.5 x 12.5 x 3.8”) Instrument weight 0.72 kg (1.56lb) Packed weight: 5 .5kg (12lb)
Standard case	420x320x97mm(16.5×12.5×3.8”) Instrument weight 0.72 kg (1.56lb) Packed weight: 5 .5kg (12lb)

*Model and gas dependent.
**Maximum reading is achieved with certain analytes such as ethanol.
***Specifications are based on isobutylene calibrations at 20 °C and 1000mBar.
All specifications quoted are at calibration point and under the same ambient conditions.
**** Based on continuous running.
#For indicative measurement only. Quoted accuracy achievable up to 2,000 ppm. For more accurate detection, calibration around concentration of interest is recommended.
Tiger XT V1.0. This publication is not intended to form the basis of a contract and specifications can change without notice.